磁阀式可控电抗器的损耗计算与分析

磁阀式可控电抗器(Magnetic-valve controllable reactor, MCR)具有直流偏磁、绕组电流谐波大和磁路中磁通密度不同的特点,这些特点不仅导致其损耗计算方法与电力变压器不同,而且使准确计算MCR的铁芯和绕组损耗比较困难。本文将铁芯分区与J-A动态逆模型相结合,提出MCR铁芯损耗的计算方法;考虑漏磁和谐波的影响,分析推导得到MCR的绕组损耗系数的计算方法和表达式。最后,通过实例的仿真和实验,验证了提出的铁芯损耗计算方法和绕组损耗系数的正确可靠性。     

Measurement of solubility and diffusion coefficients of ethylene in solid and molten low-density polyethylene with different melt indices

The diffusion behavior of ethylene in polyethylene is of great importance for the polymerization and degassing of polyethylene (PE) industry. Based on the gravimetric sorption and desorption measurement approach, an intelligent gravimetric analyzer is applied to obtain the solubility and diffusion coefficients of ethylene in solid low-density PE (LDPE) with different melt indices at 30°C to 70°C, 0 to 4 atm and in molten LDPE at 160°C to 230°C, 0 to 4 atm, respectively. Results indicate that both the solubility and diffusion coefficients of ethylene in solid LDPE are smaller than those in molten LDPE, while the dissolution enthalpy and diffusion activation energy of ethylene in solid LDPE are higher. In addition, one- and two-dimensional diffusion models are built and the effects of particle size, polymer properties, and operation conditions are systematically investigated on the diffusion behaviors of ethylene in solid and molten LDPE.     

应变纤锌矿ZnO/MgxZn1-xO量子点中离子施主束缚激子的光学性质

Within the framework of the effective-mass approximation and the dipole approximation, considering the three-dimensional confinement of the electron and hole and the strong built-in electric field(BEF) in strained wurtzite Zn O/Mg0:25Zn0:75O quantum dots(QDs), the optical properties of ionized donor-bound excitons(D+, X)are investigated theoretically using a variational method. The computations are performed in the case of finite band offset. Numerical results indicate that the optical properties of(D+, X) complexes sensitively depend on the donor position, the QD size and the BEF. The binding energy of(D+, X) complexes is larger when the donor is located in the vicinity of the left interface of the QDs, and it decreases with increasing QD size. The oscillator strength reduces with an increase in the dot height and increases with an increase in the dot radius. Furthermore, when the QD size decreases, the absorption peak intensity shows a marked increment, and the absorption coefficient peak has a blueshift. The strong BEF causes a redshift of the absorption coefficient peak and causes the absorption peak intensity to decrease remarkably. The physical reasons for these relationships have been analyzed in depth.     

基于链接相似度和作弊系数的Spam网页识别算法

Spam网页主要通过链接作弊手段达到提高搜索排名而获利的目的,根据链接作弊的特征,引入链接相似度和作弊系数两个指标来判定网页作弊的可能性。借鉴BadRank算法思想,从Spam网页种子集合通过迭代计算链接相似度和作弊系数,并根据与种子集合的链接指向关系设置权重,将待判定的网页进行度量。最后选取Anti-Trust Rank等算法作对比实验,结果验证了本文算法在准确率和适应性方面优于对比算法。     

测井曲线标准化方法研究

由于长岭凹陷区经过近60年的勘探开发,再加上井场井眼条件的差异、测井系列、仪器刻度、测量时间及操作者不同等因素,使得各测井曲线存在系统误差。因此在开展储层参数研究和有效厚度划分时,为消除这些非地层因素对原始资料的影响,有必要对测井曲线进行标准化,以保证解释结果的合理性与可靠性。测井曲线标准化方法可以分为定性和定量两种类型。其中定性方法主要包括直方图法标准化校正、均值法标准化校正和重叠图法标准化校正;定量方法则为趋势面分析校正法。本论文利用Matlab软件,采用趋势面方法对研究区域内的井进行测井曲线标准化。结果表明经过趋势面法标准化校正能够消除不利因素,准确的提取出测井曲线中的各种有用地质信息。     

面向机电设备评估的重置成本法及应用研究

由于市场的局限性和设备创造价值的不可分割性，重置成本法在机电设备评估实践中得到了广泛应用。但在应用该方法获取评估值时，对于基本公式的选择以及三大贬值或综合成新率的确定目前存在很大分歧。基于重置成本法的基本公式和定义，综合考虑了机器设备的有形损耗和无形磨损，以实体性贬值、功能性贬值和经济性贬值为基础建立了因素集，并建立了科学合理的计算设备价值的方法，对评估价值量较小且单一的机械设备的价格具有一定的实际意义和参考价值。     

Thermo-optical characterization of CdZnS nanoparticle colloids

Thermo-optical properties of cadmium zinc sulfide (CdZnS) nanoparticle colloids are investigated by interferometry technique. The nanoparticle colloids are synthesized by an improved co-precipitation method. Transmission electron microscopy, UV–vis spectrometry and X-ray diffraction analysis are used to characterize the CdZnS nanocrystals. The thermo-optic coefficient of the colloids has been determined using a Fizeau interferometer. For this purpose, the interference patterns are deformed by a photothermal phase shift which is locally induced in the sample by the focused pump laser beam. The change in the refractive index at this region imposes a shift on the phase of the fringe patterns. Fourier analysis performed on the interference patterns allows us to estimate the values of the thermo-optic coefficient and nonlinear refractive index of the sample. It is shown that the CdZnS nanoparticle colloids enhance the absorption of the laser light and induce high rise in the temperature of the sample, which leads to the nonlinear phase shift.     

Preparation and characterization of polynorbornene/sepiolite hybrid nanocomposite films

Polynorbornene/sepiolite hybrid nanocomposite films were prepared using polynorbornene dicarboximide and modified sepiolite with 3‐ aminopropyltriethoxysilane (3‐APTES). Exo‐N‐(3,5‐dichlorophenylnorbornene)‐5,6‐dicarboxyimide (monomer) and their copolymers were synthesized via ring‐opening polymerization using ruthenium catalysts. Subsequently, the surface‐modified sepiolite by 3‐APTES was mixed with the polynorbornene copolymers to prepare hybrid nanocomposite films. The modified sepiolite particles were well dispersed in N,N‐dimethylacetamide and distributed randomly throughout the polynorbornene matrix in the hybrid films, which enhanced the dimensional stability and mechanical and oxygen barrier properties of the polynorbornene/sepiolite hybrid nanocomposite films. © 2014 Society of Chemical Industry     

Direct-Contact Heat Transfer during n-Pentane Vaporization in a Two-Dimensional Water Column

Direct-contact vaporization heat transfer is investigated by analyzing the heat transfer coefficient with the area of liquid-liquid direct-contact interface. The interface areas of liquid-liquid heat transfer are determined by stroboscopic images. At higher temperature, the heat transfer area per unit volume decreases. The water temperature has no significant influence on the heat transfer coefficient. The effects on droplet size distributions of operating variables including inlet water temperature, n-pentane flow rate, and test position with packing and without packing are compared.     

里必井田承压水带压开采评估

煤层底板承压水突出是发生水害事故的原因之一,要减少该类事故的发生,需对底板突水危险性进行准确评价。为保障里必井田承压水带压开采的安全进行,基于煤层底板突水研究理论分析,采用常规突水系数法和等效厚度突水系数法,分别对里必井田内3#煤和15#煤的奥灰水突水危险性进行了研究。研究发现,奥灰水对于3#煤的开采影响不大,但在局部构造及陷落柱发育地段及采区东北部区域仍存在一定的突水可能性;奥灰水对15#煤开采具有较大威胁,大部分区域具有较大突水危险性。等效岩层厚度法计算的突水系数考虑了不同性质岩层的岩石强度和阻水能力,计算更接近生产实际,结果更可靠;且在对突水系数法进一步优化后,其评价的结果可以更精确。